Flex 4 - LED Motorcycle Rear Turn Signal - 1pc.
|Rear Turn Signal (with OEM connector)|
Pre-orders for a limited batch of 1,000 turn signals are open.
Products ordered today will ship by 30th November 2023. You will receive regular updates about the manufacturing status by email.
If the produtcs show as "SOLD OUT", force refresh this page and/or clear browser cache.
This turn signal is equipped with OEM connectors for your selected motorcycle.
It means that the turn signal can be connected to the wiring harness of your motorcycle as a direct replacement of the original part.
No modifications to the original wiring harness or any other parts of your motorcycle are required.
Additional parts could be required for correct fitment and operation of this this turn signal on your selected motorcycle.
Installation of this turn signal is done using an M10 threaded stud. If your motorcycle OEM turn signals have an M10 threaded stud, you can install this turn signal as a direct replacement and without any additional parts or modifications.
In case your OEM turn signal design is different, additional hardware could be required. Please, check our Mounting Adapters to see if dedicated mounting adapters are availiable for your selected motorcycle.
When converting from globe bulb turn signals, a load independant flasher relay is required for these turn signals to operate correctly (at a flash rate of ~1.5Hz). Please, check our Flasher Relay to see if dedicated flasher relay is availiable for your selected motorcycle.
If your motorcycle already has a load independent flasher relay installed, you can install this turn signal without any additional parts or modifications.
When in doubt, please contact us.